WaStop® Non-Return Valves
The WaStop® non-return valve is designed to prevent back flow into pipe network. The design lends itself to an unobtrusive and vandal resistant valve. There are numerous uses for the WaStop® non-return valve, including tidal outfalls, sewer chambers and the protection of domestic properties. A range of installation options allows a unique and very flexible method of preventing back flow. The housing is available in both 304L and 316L stainless steel, as well as PE, and the smaller sizes in PVC. The housing material can be chosen to suit the environment in which the valve is to be installed. Standard sizes range from ø75mm to ø1500mm with larger sizes and specials available on request. The WaStop® is available to withstand pressures of up to 8MwC. The membrane of valve is manufactured using a special blend of polyurethane. The membrane allows water to pass in the desired direction, however when backflow occurs the membrane fills, sealing the membrane against the inside of the stainless steel tube.
WaStop® - The ORIGINAL inline check valve
